Canadian Child Seat Installation Services
To install the SeatSnug yourself
| Choose your rear seat belt for installation of the SeatSnug |
|
| Attach the lower clamp plate to the SeatSnug and lightly put in the screws |
|
| Place the SeatSnug over the plastic back of the seat belt connector as shown |
|
| Use the Allen key provided to tighten the screws |
|
| If the screws protrude through the back of the SeatSnug into the seat belt replace the screws with the shorter screws provided and tighten the shorter screws using the Allen key |
|
| Your will now be sliding the clamp onto the shoulder portion of the seat belt. The clamp is shown on the right |
|
| The clamp has two channels on the underside which will slide over the top and bottom edges of the SeatSnug |
|
| Place the shoulder portion of the seat belt over the SeatSnug as shown. Notice where the seat belt latch is positioned |
|
| Slide the SeatSnug clamp over the top and bottom channels of the SeatSnug body |
|
| Push down on the lever at the bottom of the SeatSnug body and slide the top SeatSnug clamp all the way to the right. Pull on the seat belt to make sure the SeatSnug is tightly installed. |
|
